Packed Product
SPECIAL TUBE CUTTERS / INSERT SLEEVES / HOSE BANDS
PLUG FOR FLEXIBLE HOSE (STAINLESS STEEL) / PLUG FOR HIGH TEMPERATURE HOSE
Red character display
M–TCN ■ Special Tube Cutters
■ Features of the Tube Cutters (1) Dedicated Using this tube cutter you can cut tubes much easier due to the tube guide R. Tube guide R ① For large tube cutting (10mm or more) ② For small tube cutting (8mm or less) (2) This tube cutter is exclusively designed for use with M–WA/M–SFT tubes. Cutting any other tube products or wires may damage the tube cutter blades. (3) Tube cutters are consumables that need to be replaced as required.
Plug for stainless steel flexible hose(SUS–TKSP/TKSF/TKHP/TKSSPF dedicated plug)
SUS–TKMM
SUS–TKMF
① ②
B
B
L
L
ℓ 1
ℓ
ℓ 1
■ Insert sleeve (especially for quick–fitting joints for mold cooling) 10PACK–M–WR (10 Pack)
A
Part Number Type
Applicable tube Ext. Dia. × Int. Dia.
① Rc ( PT )
D D 1
L
No.
① R ( PT )
② G ( PF )
② G ( PF )
4 × 2.5
0425 0640 0860 1075 1290
2.5 3 18 4 4.5 18.5 6 6.5 20 7.5 8 22 9 9.5 25
M Material SUS304
M Material SUS304
6 × 4 8 × 6
Part Number Type
Part Number Type
10PACK–M–WR
① R(PT)
② G (PF)
① Rc(PT)
② G (PF)
ℓ ℓ 1
d B L
A ℓ 1
d B L
No.
No.
10 × 7.5
11 22 33 44
11 22 33 44
1/8 1/4 3/8 1/2
1/8 1/4 3/8 1/2
10 13 12 14 13 16
4 14 29 5 14 31 8 19 35
1/8 1/4 3/8 1/2
1/8 1/4 3/8 1/2
15 12 17 14 19 16
4 14 27 5 17 31 8 21 35
12 × 9
L
SUS–TKMF
SUS–TKMM
• Features of the Insert Sleeve Insert sleeves can prevent plastic tubes from coming loose or causing water leakage by holding them down when they become soft (due to hot water) or contract (due to water absorption by plastics in a prolonged usage). E This is an insert sleeve especially for quick–fitting joints for mold cooling. Not applicable for bolting joints ( P.995 ).
16 18.5 11 22 41.5
22 18.5 11 27 40.5
M Material SUS304
Part Number 10PACK–M–WR0425
Delivery Quotation
Order
SUS–TKML
SUS–TKMHL
L
L
B
l 1
B
Socket (Brass/ Nickel plating)
l 1
Example
O Ring (heat resistant NBR)
Opening sleeve (Brass/Nickel plating)
d
Packing (heat resistant NBR)
R
M Material SUS304
M Material SUS304
Tube lock (stainless steel)
Part Number Type
Part Number Type
φ d k a
φ d k a
R(PT) G(PF)
L
ℓ 1
B
R (PT) G (PF)
L
ℓ 1
B
Insert sleeve (SUS304)
No.
No.
Heat–resistant sealing (120°C)
11 22 33 44
11 22 33 44
1/8 1/4 3/8 1/2
1/8 1/4 3/8
4 10 17.5 20.5 12 12.7 5 12 21.25 23.25 14 14.3
1/8 1/4 3/8 1/2
1/8 1/4 3/8 1/2
12 18 19 19 13 12.7 13 19 22 22 16 14.3 15 22 24.5 24.5 17.5 17.5 18 27 28 28 20 22.8
SUS–TKML
SUS–TKMHL
8 13 24
27
16 17.5
Socket lock (Brass/Nickel plating)
1/2 11 21 34.5 33.5 20 22.8
Plug body (Brass/Nickel plating)
Part Number SUS–TKML11 SUS–TKMHL11
Quotation
Order
Delivery
Hot water tube
Tube opening ring (polyacetal)
Plug for high temperature hose (WHSG/FSHP/FSHF/KGHA dedicated plug)
■ Hose band
Applicablehose(mm) External diameter
Maximum tightening torque
Part Number
MHBT
N ・ cm {kgf ・ cm}
Type
No.
φ 13–20 φ 18–25
1 2
MHBT
350 {35}
Q Notes on handling When installing the dedicated plug to the cap nut of the stainless steel hose, do not use seal material to the dedicated plug side (Parallel threaded section for G–tube) It may cause liquid leakage or damage as the seal tape interrupts the connection of plug and cap nut. Also, when fastening the dedicated plug by cap nut, half–turn the cap nut slightly from the original position by turning it by hand. Further turning may cause liquid leakage as the sleeve inside the cap nut will crack.
FSHHL
L
■ Characteristics
MHBT is equipped with a safety cap, so there is no need to worry about injury.
B
l 1
Part Number MHBT1
Quotation
Order
Delivery
M Material SUS430
Safety cap : PE Bolt : SWCH10K
M Material Brass (C3604)
Part Number Type
φ d k a
R (PT)
M Screw
L
ℓ 1
B
No.
1 2 3
1/8 M12–P1.25 4 10 18 19 13 12.7
Part Number FSHHL1
Delivery Quotation
FSHHL
Order
1/4 3/8
M16–P1.5 6 13 19 22 15 14.3 M20–P1.5 9 13 22 24.5 15 22.8
1005
1006
Powered by FlippingBook