DATE MARKED PIN SETS/SCREWDRIVER FOR DATE MARKED PIN SET –DOUBLE RING TYPE–
● Shape of Marks and Character Font
Date Marked Pin Sets
Finished products
Mold Date Marked Pin Sets –Double Ring Type–
d B D m6
D D m6
D h7
L B d
Normal character embossed character )
+ 0.012 + 0.004 + 0.015 + 0.006 + 0.015 + 0.006 + 0.018 + 0.007
0 –0.012 0 –0.015 0 –0.015 0 –0.018
Reverse character (Concave character)
( Convex character
3.8 1.8
6
C = 0
10
5.3 2.5
8
Shape of marks
Character font
12 6.43.2
10
Outside Ring
Year/Month switching type Second ring
Year/Month switching type Date switching type
14 10.2 5.0
16
φ D h7
Width and height of font
Second ring Outside Ring Q W Q W
Indication D
Drafts for pulling (Angle, one side) Characters
M Material SUS420 H Hardness 50–53HRC
Depth of mark (mm)
E See D left page for an overview.
6 8
0.6
0.3
0.6
0.4
D
D
Characters Arrow
Arrow
0.8 0.450.8 0.55
Year/Month switching type
Double ring type
■ Year/Month Switching Type
■ Date Switching Type (2nd digit/1st digit)
10 1.050.7 16 1.851.2
1.2 2.1 0.6
0.9 1.5 0.4
6 0.15
6
0.3
Part Number Type D
Part Number
Outside rings divisions
Outside rings divisions
8 0.18 10 0.22
8 10 16
Indication
Indication
Year
25°
13°
6 8
0.6
0.4
Type D
W
0.4
0.8 0.450.8 0.55
16
Date switching type
6 21 For 2021
10 1.050.8
1.2
0.9 1.5
6
※ Days to ship will be 5–days for the adjustment of production after November 2021. Sales are scheduled to end in April 2022. 22 For 2022 (available from September 2021) ※ Days to ship will be 5–days for the adjustment of production after November 2022. Sales are scheduled to end in April 2023. 23 For 2023 (available from September 2022) ※ Days to ship will be 5–days for the adjustment of production after November 2023. Sales are scheduled to end in April 2024. 8 10 16
16 1.85 1.35 2.1
8
■ About mounting/unmounting
12
0
10 uniform divisions
12 uniform divisions
DTEZ
DTBZ
Year/ Month
Day
● How to unmount date marked pin To remove the mold date marked pin set, make sure to prepare a hole ( * a) from the plate's back beforehand. Use a round stick, etc. to drive it out from that hole as shown in the right figure.
Make a reamer hole (H7 tolerance) on the plate, and drive into it lightly using a wood or urethane hammer. If the pilot hole is too small, the inside arrow may not rotate. ● How to mount outside ring When press–fitting the date mark into the mold, be sure to remove the inside arrow and set the inside arrow after the outside ring is press–fitted. e If the inside arrow sticks out of the outside ring, it can damage the date mark set, such as crushing the threads of the inside arrow. ● Notes when mounting outside rings
10
φ D H7
16
Part Number – Year (Year/Month) DTBZ16 – 21 ( Day )DTEZ10
Delivery Quotation
Order
D
*a
● Features A date mark set –double ring type– consists of an “inside arrow and a double ring structure”. A year/month switching type consists of a year indication for 6 years and a month indication. The year/month switching type can be used for six years, thus eliminating the trouble of replacing the conventional inside arrow, and also helping to reduce costs. A date switching type can indicate both the “2nd digit and the 1st digit”.
6 8
4.0–5.0 6.0–7.0 6.0–8.5
10 16
11.0–14.0
* a
● Structure
Method of changing over the indication
■ Screwdrivers for Date Marked Pins
Changing the year indication
Changing the month indication
Turn clockwise
Turn counterclockwise
Detail dimension
Second ring
Outside Ring
12
12
8 ° ±1 °
Inside Arrow
M Material Body: PP Tip section: S45C s Surface treatment Tip section: Black Oxide (Fe3O4)
DTBZ magnified photo
When turned clockwise, only the inside arrow (arrow part) rotates, enables the year to be changed. In the case of a date switching type, turning it clockwise causes the 2nd digit to be changed.
Turning it counterclockwise causes both the inside arrow (ar- row part) and the second ring to turn simultaneously, enabling the month to be changed. In the case of a date switching type, turning it counterclock- wise enables the 1st digit to be changed.
Part Number
Applicable Date Marked Size
A
B
Type
No.
● Notes E Characters on the finished products will be embossed normal character (Convex). (Embossed character) E If the mold temperature exceeds 150 ℃ , use a heat–resistant type with a removal tap. X Cannot be used for die cast. For die cast, use Date Marked Pins for Die Cast ( D P.539 ). E If the date marked pins are clogged with tar, the inside arrow will not turn, so make sure to perform maintenance work periodically.
3
0.9
0.12
D3
DTPPN
4
1.4
0.15
D4/D5
6
1.8
0.25
D6
E Please use for date marked pins of small diameter (D3/D4/D5/D6). However, when used for DTBZ and DTEZ, please select DTPPN4 for D6, and DTPPN6 for D8.
Part Number DTPPN4
Delivery Quotation
Order
533
534
Powered by FlippingBook