EJECTOR PLATE RETURN DETECTION SWITCHES
① V-156-1A5-T (Microswitch: Hinged roller lever type) Set of ①②③ EGS (incl. 2 pcs. of CB5-15)
Part Number EGS-V
Part No.
Part Number
Order
①
①②③ ④⑤③
EGS
Set of Set of Switch
(incl. 2 pcs. of CB5-15)
**
φ 4.8 × 4.8
Quotation
EGS-V (incl. 2 pcs. of CB5-15)
34.0 ± 0.8 t = 0.5 *
5.1
Delivery
φ 3.1 -0.03 +0.13
Hole
① ②
8.1
V-156-1A5-T EGS-ANGLE EGS-BOARD V-15-1A5-T
Angle plate
Heat insulation plate ③
④ ⑤
Switch
EGS-AV
Angle plate
* Stainless steel lever ** Oil-free type polyacetal resin roller
Solder (shared tab) terminal 3 -# 187 (t 0.5 )
3.4
± 0.15
E CB5-15 is included only in the set products.
22.2
2.8 ( 10 )
10.3
± 0.1
27.8
②
• Examples of bolt hole boring on a mold base
Example
37.8
± 0.8
② EGS-ANGLE (L-angle plate)
5.5
2.0
Bolt hole boring examples
Switch mounting examples
① Microswitch (hinged roller lever type) Manufactured by Omron
■ EGS/EGS-V
■ EGS
• Force needed to start 1.23N {125gf} • Minimum return force 0.14N {14gf}
• Adjust the L-angle plate's height for activation/ deactivation of the lever.
• Maximum movement till starting PT 4.0mm • Minimum movement after starting 1.6mm • Maximum differential motion 1.5mm • Operation point OP 20.7 ± 1.2mm Standard • Rated voltage: 250V/Rated current: 15A • Heat resistance: up to 150°C
6.5
12.0 25.0
15.0
③
③ EGS-BOARD (Heat insulation plate)
( 8.5,17.0 )( 20.5,17.0 )
2.0
2 -φ 4.5
5.0
5.0
2 - M5
( 0,0 ) Starting point
■ EGS-V
( 48.5, - 5.4 )
2 - M3
② M Material SPCC
• To mount EGS-V on a mold base on which holes for EGS have already been machined, attach the M3 bolt on the right hand side of the L-angle plate. • Adjust the M3 bolt position for activation/deactivation of the push button.
32.0 ( 22 )
( 26.3, - 15.7 )
③ M Material Bakelite (black)
CB3 - 20
④ V-15-1A5-T (Microswitch: Push button) Set of ④⑤③ EGS−V (incl. 2 pcs. of CB5-15)
④
4.2
φ 3.1 - 0.03 + 0.13
20.2 ± 0.25 2.8
Hole
5.1
※ An example of using stopper pin/stopper ring D P.906 .
■ EGS-V
■ EGS-V
Solder (shared tab) terminal 3 -# 187 (t 0.5 )
3.4
± 0.15
• Adjust the M3 bolt position for activation/deactivation of the push button. • Attach the M3 bolt on the left hand side of the L-angle plate. • Use 2 pieces of M5 bolt to attach the L-angle plate.
10.3
22.2
2.8 ( 10 )
± 0.1
2.0
( 21.0,15.0 )( 33.0,15.0 )
27.8
CB3 - 20
37.8
⑤
± 0.8
( 0,0 ) Starting point
2 - M5
⑤ EGS-AV (L-angle plate for push button type microswitch)
6.5
9 6
④ Microswitch (push button type) Manufactured by Omron
φ 5.5
2.0
( 45.0, - 5.0 )
2 - M3
( 22.8, - 15.3 )
• Force needed to start 1.96N {200gf} • Minimum return force 0.49N {50gf}
2 - M3
• Maximum movement till starting PT 1.2mm • Minimum movement after starting 1.0mm • Maximum differential motion 0.4mm • Operation point OP 14.7 ± 0.4mm Standard • Rated voltage: 250V/Rated current: 15A • Heat resistance: up to 150°C
※ An example of using stopper pin/stopper ring D P.906 .
10.3
15
10
30
20.0
③
③ EGS-BOARD (Heat insulation plate)
2 -φ 4.5
5.0
5.0
⑤ M Material
SPCC a Accessories CB3−20 (1 pc.) M3 nut (2 pcs.)
32.0 ( 22 )
③ M Material
Bakelite (black)
907
908
Powered by FlippingBook